At M Kemp Testing Services we quote, install, commission and maintain fire alarm systems.

This involves complying with current legislation and following the British Standards. After the installation has been completed if required we can train the customer on the daily and weekly inspection and testing on their system, including how to investigate any activations.

Once the installation has been carried out we will provide a log sheet of what and where we have installed the systems to ensure the customer is aware of the locations and that they are all tested.

Recommend by British Standards BS 5839, and advised by us:-

Daily:
Check to see if there is only a power light illuminated on the fire panel.
If there are any faults showing make a note then contact your Fire Alarm maintenance company.

Weekly:
1) The same day and time each week, when there are staff within all sounding areas

2) Check you know the code or you have the key to stop the alarm sounding

3) Place the test key within the call point (brake glass), the alarm will sound

4) Remove the test key

5) Type in the code or turn the test key at the panel

6) Turn the key to position or press Silence

7) Ask the staff - did all areas sound?

8) Check the zone which is showing matches the area of the test

9) Wait 10 Seconds

10) Turn the key to position or press Reset

11) Return key (if used)

12) Make a note within your log book which point was tested

13) Contact your maintenance company with any problems

14) Test a different call point when completing your next weekly test

6 Monthly:
Minimum service time (may be more frequent if specified by your risk assessment).
Service inspection undertaken by your Fire Alarm maintenance company.

12 Months:
Part service inspection.
Service inspection undertaken by your Fire Alarm maintenance company.

Click here to visit the British standards website.